I added iThena PERF (ithena_iperf) application for testing.

This application uses BOINC wrapper and is based on iperf3.

iperf3:

https://en.wikipedia.org/wiki/Iperf
https://iperf.fr/iperf-download.php

iThena PERF uses the computer network (internet) quite intensively.
The application can use a lot of data transfer to the Internet.
An Internet connection is required.

The iThena PERF application is available for the Windows platform.

Please perform the tests and send me the information ;)

Work well on 3 Windows computers
but on one, after the first WU, a message on the log :
"Votre fichier app_info.xml n'a pas une version utilisable de iThena CNode"
"Your app_info.xml file does not have a usable version of iThena CNode"

https://root.ithena.net/usr/result.php?resultid=2826638

I have resetting the project and get a new WU...

How long is the unit supposed to run? It's been on 100% for several hours already and still running..

How long is the unit supposed to run? It's been on 100% for several hours already and still running..

How many hours do you have?

During the test phase, I generated 2001 tasks.

The average time to complete a task may vary due to various factors (speed of Internet connection, network and system nodes load).

According to current observations: ~1h per task.

Initial tasks will have no significant credits.

The next tasks will set a fixed amount of credits for the correct task.

At the start I will set a relatively small value: 2 credits per task.

Later on we will make corrections and changes.

Please provide information and comments.

How long is the unit supposed to run? It's been on 100% for several hours already and still running..

How many hours do you have?

8 hours currently

8 hours currently

You have the same problem on two computers? 8 hours is too long...

Work well on 3 Windows computers
but on one, after the first WU, a message on the log :
"Votre fichier app_info.xml n'a pas une version utilisable de iThena CNode"
"Your app_info.xml file does not have a usable version of iThena CNode"

https://root.ithena.net/usr/result.php?resultid=2826638

I have resetting the project and get a new WU...

Always the same on this computer : after each WU, the same message and no new WU!
I don't want to reset the project for each WU !? :-o

Work well on 3 Windows computers
but on one, after the first WU, a message on the log :
"Votre fichier app_info.xml n'a pas une version utilisable de iThena CNode"
"Your app_info.xml file does not have a usable version of iThena CNode"

https://root.ithena.net/usr/result.php?resultid=2826638

I have resetting the project and get a new WU...

Always the same on this computer : after each WU, the same message and no new WU!
I don't want to reset the project for each WU !? :-o

Are you absolutely sure there is an app iThena CNode in the information?
Only the Windows application PERF is available on Windows.

Yes, I'm sure the message says CNode even if the Windows application is PERF !
And there is no app_info.xml file in iThena folder !?

I added iThena PERF (ithena_iperf) application for testing.

Will there be 32-bit and 64-bit Linux versions of the iThena PERF application?

---

8 hours currently

You have the same problem on two computers? 8 hours is too long...

Same thing here. Nearly 23 hours. Users don't control how long NCI tasks take to run.

After some WU credited 2 credits, PERF WU all credited 0 crédits !?

Thanks a lot for the alarm!
Yes. Unfortunately, it was my mistake.
I already fixed it.
Tasks after 1-2 hours will have 2 credits.

so will the expected runtime now be 1-2 hours as well?

so will the expected runtime now be 1-2 hours as well?

Yeah. Normally, yes. Sometimes there can be system/network errors etc.
Normally 1-2 hours.

Will there be 32-bit and 64-bit Linux versions of the iThena PERF application?

So I plan to add Linux platform support for iThena PERF.
However it requires time.

Thanks a lot for the alarm!
Yes. Unfortunately, it was my mistake.
I already fixed it.
Tasks after 1-2 hours will have 2 credits.

So cancel the current tasks?

If the processing time exceeds 4 hours, the task can be cancelled.

Still receiving zero credits.
https://root.ithena.net/usr/results.php?hostid=4166

PS Have also been having some long runner's as well. Just aborted a WU that had been running over 8 hours. Before the 8 hour work unit they were running normally.
https://root.ithena.net/usr/results.php?hostid=4361&offset=0&show_names=0&state=6&appid=